A design approach to triple-mode resonant feed antenna is advanced for parabolic reflector antenna system. The antenna is composed of a slit-loaded 1.5-wavelength sectorial dipole, a primary corner reflector, and an auxiliary circular reflector. The corner angle of the primary reflector can be employed to properly narrow down the H-plane half-power beam width (HPBW), while with the E-plane one rarely affected, such that equal E-/H-plane characteristic can be yielded accordingly. Unlike traditional backfire antennas, high-order resonant modes are employed to generate inverse taper radiation pattern at the high frequency band. As is numerically demonstrated and experimentally validated, the corner angle of the primary reflector can be eventually determined as 45°. The antenna exhibits an impedance bandwidth of up to about 79.7%, and a nearly equal E-/H-plane bandwidth of up to about 29.4%. Average HPBW of about 65°, gain up to about 8.9 dBi with fluctuation of less than 1 dB can be achieved within the equal E-/H-plane bandwidth. The inverse taper radiation pattern at the high frequency band can provide effective edge illumination and uniform aperture field distribution in parabolic reflector antenna systems.