The successive-approximation (SA) algorithm is traditionally used for low-bandwidth applications because it requires n clock cycles or more to obtain n-bit resolution. However, the use of modern nanometer CMOS technologies and special design solutions overcome the speed limit, enabling conversion rates in the hundreds of MHz with very low power consumptions [1]. This design uses the successive-approximation method to obtain 8b up to 400MS/s with very low power using a 1.2V supply. Key features of the architecture are a resistive DAC and a 2b-per-cycle conversion with interpolated sampling front-ends and shift registers. A cross-coupled bootstrapping network is also implemented to alleviate the signal-dependent clock feed-through. The very compact layout leads to a silicon area of 0.024 mm2. © 2011 IEEE.